Create dramatic Bleeding Heart Wax Melts that release red “blood” wax as they melt. Perfect for Halloween collections or gothic themed ranges.
60
Time to Complete
intermediate
Difficulty
 | £11.60 ex VAT | Quantity Max: 23 Min: 1 Step: 1 | |||
 | £4.10 ex VAT | Quantity Max: 157 Min: 1 Step: 1 | |||
 | £10.70 – £159.98Price range: £10.70 through £159.98 ex VAT | Quantity Max: Min: 1 Step: 1 | |||
 | £4.95 – £74.85Price range: £4.95 through £74.85 ex VAT | Quantity Max: Min: 1 Step: 1 | |||
 | £0.55 – £28.00Price range: £0.55 through £28.00 ex VAT | Quantity Max: 100 Min: 1 Step: 1 |
-
Pouring Jug
-
Digital Thermometer
-
Weighing Scales
-
Spatula
Step 1 – Melt
Weigh 80g wax and melt using a double boiler over medium to low heat.
Do not exceed 80°C.
Once melted, remove from heat and add a few drops of red dye. Stir thoroughly.
Step 2 – Set
Allow wax to cool to 55–60°C.
Pour into a standard clamshell mould (pouring hotter may melt the plastic).
Leave to fully set.
Once hardened, remove and cut into small pieces — these will form the bleeding centre.
Making the Heart Shell
Step 3 – Melt & Fragrance
Melt another 80g wax, again not exceeding 80°C.
Remove from heat and allow to cool to 65°C.
Add fragrance oil (6–10%) and stir thoroughly.
Allow to cool further to 55–60°C before pouring.
Step 4 – First Pour
Pour wax into the heart mould, filling each cavity halfway only.
Wait around 10 minutes — the wax should thicken but not fully set.
Step 5 – Add Red Centre
Place a piece of red wax into the centre of each heart.
Lightly press down so it stays in place.
Step 6 – Final Pour
Carefully pour the remaining wax over the top to fill the mould.
If the red centre begins to melt, stop pouring and wait 1–2 minutes for the wax to cool before continuing.
Step 7 – Set & Cure
Leave to set overnight at room temperature.
For best scent throw, allow melts to cure for up to 2 weeks before use.
Your Bleeding Heart Wax Melts are now ready to create their dramatic melting effect.
Bleeding Heart Wax Melts may look like ordinary heart-shaped melts at first glance, but once heated, a hidden red centre begins to melt and flow — creating a striking bleeding effect.
These melts are perfect for Halloween collections, gothic themes, or statement seasonal launches. By creating a coloured inner core and encasing it within a fragranced outer layer, you achieve a visually dramatic result when the melt pool forms.
This technique requires careful temperature control to prevent colours from blending too early. Pouring at the correct temperature ensures the red centre stays intact until the melt is in use.
Always check IFRA and legal limits for your chosen fragrance oil before making or selling.
1. Why is my red centre blending into the outer wax?
Your wax is likely too hot when pouring. Always pour at 55–60°C to prevent the centre from melting too early.
2. Why did my clam shell melt or warp?
This happens when wax is poured too hot. Allow wax to cool to 55–60°C before pouring into plastic moulds.
3. Can I use a different fragrance?
Yes, you can use any fragrance oil. Dark, spicy or gothic-style scents such as Dragons Blood, Patchouli or Black Cherry work particularly well for this design.
4. How strong should I fragrance my wax melts?
A 6–10% fragrance load is typical, depending on your wax manufacturer’s guidelines and IFRA limits.
5. How long should I cure wax melts?
Although they will set overnight, curing for 7–14 days improves scent throw.
6. Can I create this effect with other shapes?
Yes. This technique works well with skulls, pumpkins, roses or any mould that allows space for a hidden centre.
7. Why is my red centre moving when I pour the top layer?
Ensure the first layer has thickened slightly before placing the centre inside, and press it down gently to secure it before topping up with wax.